![]() SST: 3840 x 2160 60Hz, MST: (x2) 2560 x 1600 60Hzĭefault monitor port to boot with UEFI menu Using USB-C to connect a keyboard or mouse will only work intermittently. When connecting an external keyboard or mouse, use the USB-A ports, not USB-C.*If the connection is not working, you may be using a passive adapter or a cable with a passive adapter built in. If connecting an HDMI or a DVI monitor to the mDP port, an active mini-DP to HDMI or active mini-DP to DVI adapter is required.The Windows boot process should take ~25 seconds. If the only display connected to the device is USB-C, if you don’t use the mDP port (as noted above), you won't see a startup screen output when you turn on the device until Windows is booted.Requirements and notes for using Windows Developer Kit device display ports: Taking ownership of firmware using SEMM.Booting into Windows Recovery Environment (WinRE) or Windows PE (WinPE) using a USB boot disk.Any Windows OS boot (startup) activity that requires seeing something on the screen before Windows loads, like a Windows startup error or a bug-check boot loop.BitLocker processes (such as a recovery key prompt or a pre-boot PIN).Installing the recovery image for the device, downloaded from the Recovery Image page.Booting into the UEFI to change firmware settings.Seeing the startup logo when turning on the device.Scenarios that will require you to use the mDP port include: Until the device is booted into Windows, all display output defaults to the monitor connected to the mDP port. There is no DC mode to test against.įor the best experience, we recommend you use the mDP port as your main display for setting up this device. There is no battery on the device, hence the system will only run on AC.The Fan will come on as needed to manage thermal load. Fan control is supported and controlled by firmware.You can choose to hibernate the device using OS controls. The device will default into "Connected Standby Mode" when not in use. ![]() Attach the power supply to the back on the far left of the device. ![]() You can use UEFI to manage the firmware features on your device. Unified Extensible Firmware Interface (UEFI) replaces the standard basic input/output system (BIOS) with new features including faster startup and improved security. The device supports up to three displays by using the mDP port and the two USB-C ports. (USB-C monitor connections are not compatible when exploring UEFI.)Īll external ports will be available after the device boots into Windows 11 including: UEFI button: Hold the Power button + the UEFI button to boot into the UEFI menu.This method can be used to re-image the device with the latest Recovery Image. Boot to USB button: Hold the Power button + the Boot to USB button to boot to the USB-C thumb drive. ![]() With the device flat on the table, the 3 buttons on the left side of the device, from left to right, are: When the device is turned on and connects to the Internet for the first time, follow the getting started prompts and configuration for Windows Update to ensure the latest software is running on the device.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |